Railing Installers Hamptons – Could It Become Better Than This..

Posted by Clay on June 12, 2018

Should you be buying a stair with balusters in a contrasting material, including painted balusters on an oak stair, questions will more than likely arise concerning the finishing of the stair. “Should my painter finish the balusters separately from the stair, then have the balusters set up when the stair is finished?

Below are a few things to consider with Wood Stairs Suffolk County: Your painter will normally opt for painting the balusters before installation. This enables them to be sprayed rather than brushed and eliminates lots of “cut-in” work.

Painting balusters separately means the stair installers will have to come back to the web page, take away the railings and install the balusters. You will have charge for this particular “second trip” for the jobsite. You will have to make sure to schedule this “second trip” in coordination with all the completion of the finish.

Leaving your balusters out for painting signifies that they are more inclined to be lost or stolen during this time. You will end up responsible for balusters left on the jobsite. Once the painted balusters are finally installed, you will have additional “touch-up finishing required on the rail joints. Holes will have to be filled and stain and finish re-applied for the last finish.

Plan installing of your hardwood stair for after your drywall has become taped, sanded, and primed. The drywall process can affect the stair. Drywall mud and paint overspray can make the stair finishing process very hard and may even make desired results impossible to achieve.

Most hardwoods are a wide open grain wood and when dirt gets baked into open grain it is extremely difficult to remove, despite sanding. This may possess a negative effect on the appearance and texture in the finish. Care also must be utilized to protect the stair from dirt and mud.

Never Cover Hardwood Stairs With Plastic. Plastic does not allow airflow, trapping moisture underneath and creating the wood to grow and contract. This expansion and contraction causes the wood joints to open up up and might make the wood to crack.

The environmental conditions indoors are critical to the caliber of the stair. Hardwood lumber has been dried via a very controlled process to an industry standard moisture content of 6 – 8%. This matches the moisture content vcbxbf the normal home and allows the wood to stay stable under normal conditions.

In cold climates, when a home is heated to your high temperature during winter, air can become very dry, resulting in the wood to shrink. This shrinkage could make cracks visible in the wood and joints may begin to open up. Subjecting a stair to high amounts of heat is much like putting it inside an oven and can accelerate the deterioration in the stair.

All hardwoods must be sealed on every side to retard movement and protect from being exposed to elements and damage. It is suggested to seal wood immediately.