Water Damage And Mold Restoration – The Facts? It is the process of repairing a house or property to its pre loss condition. Damage to the home could be as a result of an overflow, flood or any other water damage and mold event. The water damage restoration process involves several key procedures like loss assessment, categorization based on the water contamination levels, decontaminating and drying the structure, monitoring of the process and completion of the process. The two main large certifying bodies, namely the IICRC (Institute of Inspection, Cleaning and Restoration Certification) and also the RIA (Restoration Industry Association) that recommends standards for water damage restoration. The S500 damage because of water guide is the benchmark tool which is used by companies focusing on restoration of water damage.
Loss Assessment and Categorization – Loss evaluation is the first and the most significant part of water damage restoration. The assessment must be correct so that the right response can be taken. In restorating the injury due to water, technicians and the insurance firms must work together and know what is damaged and how to make restoring the harm. Identifying the origin from the damage, documentation of damage, and accurate estimates are mandatory for any proper water damage restoration. Categorization is based on the contamination levels of the water source. The categories are the following
Category 1 – This is water from clean sources like pipes, sinks and toilets without faeces or urine.
Category 2 – This really is water which has some contaminants like water coming from a dishwasher, washing machine or toilet with urine.
Category 3 – This can be water which is highly unsanitary and is capable of doing causing illness or death if ingested. Sewage water, water from toilet with faeces, standing water with microbial growth and floodwater are a few examples.
Decontamination and Drying – Following the evaluation is finished, the whole process of drying and decontaminating begins in the site. Based on the extent of damage, damage caused due to water can be classified into 4 types. Class 1 Damage- When loss is restricted to some small area and much less water has been absorbed by materials. This results in slow evaporation rate. Class 2 Damage – If the damage is always to the complete room and carpet area. Class 3 Damage – When the entire area is saturated with water and Class 4 Damage – when there are lots of deep saturation pockets. Decontamination and drying is really a key stage in Water damage and mold restoration and equipments like blowers, dehumidifiers, scrubbers and subfloor drying equipments need to be used. Decontamination must be done if contamination has been detected in the region. Decontamination may be completed for the whole area or even in specific pockets where contamination has become detected.
Monitoring and Completion – Monitoring the restoration procedure of damage caused as a result of damage is critical to get the desired results. One has to be proactive through the monitoring process. Checking in the event the drying equipment is setup properly, assessing when the personnel involved are qualified for the job and checking when the equipments have been in working order inwtsy all portion of the monitoring process. Necessary steps should be taken if anything wrong is spotted throughout the monitoring process. The entire procedure of water damage and mold restoration will be classified as complete only once the humidity, temperature and also the moisture content is just as per industry standards. Upon completing the water damage restoration process, the drying equipment can be removed.